As an Amazon Associate I earn from qualifying purchases. Amazon links on this page are affiliate links. Our disclosure. Check the selected size, seller and current price before ordering.

Identify the pot before shopping
A replacement part is a small purchase with an unusually easy ordering mistake: “Bialetti, six cups” does not fully identify it. Write down model family, capacity and generation, then compare the old part with the manufacturer's table.
This guide starts with Moka Express and Venus because they have separate parts families. It is a buying aid, not a universal fit guarantee for every pot sold under those names.
- Check the box, manual or original order for the model and cup size.
- With the pot cool and disassembled, measure the old ring's inside and outside diameters in millimeters.
- Measure the filter plate separately. A matching outer ring diameter alone is insufficient.
- Read the replacement package contents and compatibility list before ordering.
Make a part-measurement record before selecting a kit
Start with the component you actually need. Bialetti NZ publishes separate ring/filter and funnel tables; its ring packs contain one ring and one plate, while a funnel is a separate item. The following is an editorial worksheet for comparing those sources with your pot and a selected package. No pot or replacement part was measured or fitted for this guide.
Let the pot cool completely and follow its disassembly instructions. Photograph the model markings, original parts and measuring-tool position together. Record millimeters, the tool used and any uncertainty instead of rounding an awkward result to the nearest catalog size. An old ring can be stretched or distorted; its observed size is a clue, not a replacement manufacturer's nominal specification. Do not invent an acceptable fit tolerance from this table.
| Record field | What to write or photograph | What still needs confirmation |
|---|---|---|
| Pot identity | Brand, complete model family, nominal cup size and any generation or model code; note where each came from. | A cup label alone does not identify every component. Mark missing identity as unknown. |
| Ring | Inside and outside diameters in mm; note splits, stretching or a shape that is no longer round. | Use the correct family table and ask for help if wear prevents a useful comparison. |
| Flat filter plate | Plate outside diameter, its condition and a photograph separate from the funnel. | A matching ring outside diameter does not confirm the plate size. |
| Funnel | Both diameter and length, using the same reference points as the supplier's diagram or confirmed explanation. | If the measurement endpoints are unclear, ask before comparing numbers or ordering. |
| Source row | Exact source URL, model row, dimensions and date checked. | Do not transfer one component's compatibility statement to another component. |
| Selected offer | Exact selected model/size, part number if supplied, package counts and included components. | Retail titles, photographs and selectors can disagree. Keep the order unresolved until clarified. |
| Unresolved gap | The precise missing fact, plus the photos and measurements sent to the manufacturer or seller. | Record the answer and which model/version it covers; silence is not confirmation. |
A useful message is: “My model marking says __; the old ring reads __ inside / __ outside mm; the plate reads __ mm; the funnel reads __ diameter / __ length mm. Your selected package says __. Does that exact part number cover this model/version, and what measurement endpoints are you using?” This gathers evidence for a decision; it is not a request for a universal cross-brand substitute.
Resolve mismatches before ordering
Use these cases to decide what evidence to obtain next. The numerical examples below are comparisons of the freshly checked manufacturer tables, not measurements of a sample or a physical fit test.
| What you have | Why it is not enough | Next step |
|---|---|---|
| A 65 mm ring outside diameter | The published Moka Express 3/4-cup row has a 50 mm inside diameter and 57 mm plate; the Venus/Musa/Kitty 4-cup row has a 51 mm inside diameter and 60 mm plate. | Confirm the family and measure the inside and plate separately. Do not order solely from 65 mm. |
| A 60 mm funnel diameter | The Moka Express 3-cup and 4-cup rows both say 60 mm diameter, but lengths are 60 and 76 mm: a 16 mm difference. | Compare length and exact model as well as diameter; clarify the measuring endpoints if needed. |
| A Brikka cup label and a Moka-family ring pack | The ring table specifically maps Brikka 2-cup to the 3-cup pack and Brikka 4-cup to the 6-cup pack. That is a ring/filter mapping, not permission to substitute a Moka Express funnel. | Keep the component name in the comparison and obtain the correct funnel/generation information separately. |
| A worn or missing old part and an uncertain model | A guessed measurement or a similar product photo cannot settle nominal fit, and a replacement seal cannot establish the condition of the complete pot. | Pause the purchase and send identity photos to support. Do not trim, stack or force parts to manufacture a match. |
Worked comparison, not a fit result: suppose an unidentified pot has a ring that appears close to 65 mm outside and a plate that appears close to 60 mm. The stainless 4-cup row becomes a question to investigate; it does not prove the pot is a Venus or make an Express kit suitable. Confirm the pot identity and the selected part's compatibility before deciding.
Before returning a pot to use, follow its own illustrated assembly and inspection instructions. The cited Moka Express instruction sheet calls for intact, correctly positioned parts and original spares suitable for the model; it says to contact the dealer or manufacturer when in doubt. This Moka Express instruction sheet is not the manual edition for every Venus, Brikka or induction model.
A useful size cross-check
| Family / capacity | Ring inside / outside | Filter diameter |
|---|---|---|
| Moka Express 1-cup | 40 / 51 mm | 47 mm |
| Moka Express 2-cup | 41 / 57 mm | 50 mm |
| Moka Express 3/4-cup | 50 / 65 mm | 57 mm |
| Moka Express 6-cup | 55 / 71 mm | 64 mm |
| Moka Express 9-cup | 63 / 81 mm | 73 mm |
| Moka Express 12-cup | 74 / 90 mm | 82 mm |
| Venus / Musa / Kitty 4-cup | 51 / 65 mm | 60 mm |
| Venus / Musa / Kitty 6-cup | 56 / 72 mm | 66 mm |
Reference: Bialetti NZ's Moka family table and stainless model table, checked October 22, 2026. Treat these as a cross-check for the models listed there; confirm your own version and the replacement seller's dimensions.
Notice the 4-cup example: the two rings have the same listed outside diameter, but the inside diameter and filter plate differ. This is why “it looks about right” is not a sufficient way to choose a kit.
Gasket and filter-plate sets by Moka Express size
These links are size-specific shopping starting points. Compare the listing's model and measurements with your pot before ordering. A flat filter plate is held beneath the upper chamber by the gasket; it is not the basket-shaped funnel.
Moka Express 1-cup set
The linked listing identifies a Bialetti gasket and filter replacement for a 1-cup Moka Express. Check the model and selected package before purchase.
View 1-cup gasket and filter on Amazon →Moka Express 2-cup set
This is a separate 2-cup gasket and filter listing. The 2-cup ring and plate dimensions differ from the 1-cup set above.
View 2-cup gasket and filter on Amazon →Moka Express 3/4-cup set
The linked Amazon US listing identifies a pack of three gaskets and one plate for the 3/4-cup Moka Express family. Check your measurements and selected variant; do not treat it as a Venus kit.
View Bialetti Moka Express 3/4-cup gasket and filter set on Amazon →Moka Express 6-cup set
This listing identifies three gaskets and one filter for the 6-cup Moka Express. It is a separate selection from the smaller set.
View Bialetti Moka Express 6-cup gasket and filter set on Amazon →Moka Express 9-cup set
The 9-cup gasket and plate have their own dimensions in the manufacturer's table. Confirm that the selected listing names your model.
View 9-cup gasket and filter on Amazon →Moka Express 12-cup set
For a 12-cup Moka Express, compare the old gasket and plate with the 12-cup row before selecting this kit.
View 12-cup gasket and filter on Amazon →Pack counts are retailer-specific: the cited NZ reference packs contain one ring and one filter. We use their dimension tables for comparison, not as a description of every US package.
Replacement funnels are a different part
The funnel is the removable basket that holds the coffee grounds inside the lower chamber. Bialetti's funnel size table lists diameter and length separately: 1 cup 44 × 46 mm, 2 cup 52 × 54 mm, 3 cup 60 × 60 mm, and 6 cup 66 × 82 mm. Measure both dimensions on the old funnel and confirm the model family; a 3-cup and 4-cup funnel share a diameter but have different lengths.
Moka Express 1-cup funnel
Choose this basket only if your original funnel and the listing's model information match the 1-cup version.
View 1-cup replacement funnel on Amazon →Moka Express 2-cup funnel
The 2-cup funnel is a different size from the 1-cup and 3-cup baskets. Check your original basket against the manufacturer's measurements.
View 2-cup replacement funnel on Amazon →Moka Express 3-cup funnel
Check the 60 mm diameter and 60 mm length against your old 3-cup funnel rather than substituting a 4-cup basket.
View 3-cup replacement funnel on Amazon →Moka Express 6-cup funnel
This listing names the 6-cup Moka Express funnel. It is not a replacement for the filter plate in the upper chamber.
View 6-cup replacement funnel on Amazon →An optional 3-cup filter-plate alternative
The E&B Lab by IMS Competition Moka filter is a third-party filter plate, not a Bialetti funnel. Its manufacturer lists a 3-cup version with a 57 mm external diameter and 49.2 mm internal diameter. Compare these dimensions with your original plate and the included gasket information before ordering. We have not tested a taste improvement, so treat its finer perforations as a design difference rather than a promised result.
Source: E&B Lab product specification and IMS catalog.
View E&B Lab 3-cup filter on Amazon →If the handle is damaged
Do not use a loose or damaged handle to lift a hot pot. The linked Bialetti replacement handle is listed for 3- and 4-cup Moka Express models; compare the original attachment before purchase. Bialetti NZ says replacement handles must be attached by an authorised repairer. The Moka Express manual also warns against using the handle as a lever to open or close the pot.
View 3/4-cup replacement handle on Amazon →Venus, Brikka and Moka Induction need their own checks
For Venus, begin with the Venus / Musa / Kitty parts table and retain that family name when you shop. Do not substitute the Moka Express links above just because the cup count matches.
For Brikka and Moka Induction, identify the generation before choosing a funnel or other component. Bialetti's spares catalog separates older and newer funnel versions. A gasket compatibility entry does not prove that the funnels are interchangeable.
If your old part differs from the published measurements, stop at that discrepancy. Send the manufacturer or seller the model information and measurements rather than ordering several near matches.
Replacing the seal is also a chance to inspect the pot
Follow your pot's illustrated assembly instructions. Clean the seating area, inspect the plate and funnel, and check the new seal lies flat before reassembly. Do not stack seals or cut a replacement to make it fit.
The Moka Express instruction sheet calls for compatible original parts and recommends replacing the gasket at least once a year, or when worn. For routine care, see how to clean a moka pot.
If leakage continues after correct assembly with the correct parts, investigate the cause rather than compensating with excessive tightening. A damaged body or a repeatedly venting safety valve needs attention beyond a new gasket.
Common questions
Can I choose a replacement funnel from its diameter alone?
No. Compare the exact model family and both the published diameter and length. The cited Moka Express table lists the 3-cup and 4-cup funnels at the same 60 mm diameter but different lengths, 60 and 76 mm.
Does the same cup count guarantee the same gasket?
No. Match the model family as well as capacity. Gasket inner diameter, outer diameter and filter-plate diameter can differ between families.
Can I trim a gasket that is too large?
Do not modify a replacement to force a fit. Recheck the model, dimensions and listing, and obtain the compatible part.
When should I replace the gasket?
Replace a worn or damaged gasket and follow the interval in your model instructions. The cited Moka Express manual recommends replacement at least annually; do not wait if the seal fails earlier.
Considering a second-hand brewer?
Use the second-hand purchase checklist to separate exact identity, supplied parts and unresolved condition questions before paying. A replacement part is not a certificate for the complete assembly.